The SERIES TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.
For models with resistive thermistors or RTD outputs, please click here for temperature to resistance lookup tables.

Features:
• Easy to mount external tab housing and flange options for duct applications
• 1/4 turn housing cover with chain to prevent dropping
• Multiple conduit knockouts for easy installation positioning
• 8´ plenum rated cable option
• Terminal connector eliminates need for wire nuts

Approvals:
• GOST-R Certificate

Applications:
• Building automation
• VAV temperature sensing
• Chiller or boiler loops
• AHU monitoring

Specifications:

Accuracy:	Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor DIN Class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).
Temperature Limits:	Operating: -40 to 302°F (-40 to 150°C).
Sensor Curves:	See Resistance vs. Temperature Table.
Cable Rating:	Plenum option includes UL listed plenum cable.
Housing Material:	Meets UL, 94 V-O polycarbonate plastic.
Thermowell Material:	TE-I: 304 SS.
Housing Rating:	NEMA 4X (IP66) (DFW, IBW only).
Weight:	5.3 oz (150.3 g).